3.INSTALL LOCK PLATE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 3.INSTALL LOCK PLATE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
3.INSTALL LOCK PLATE

Using an E8 "TORX" socket wrench, install the stud bolts to the timing chain case assembly. Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
ii.

*a
9.0 mm (0.354 in.) *b 19 mm (0.748 in.)
Using an E6 "TORX" socket wrench, install the stud bolt to the timing chain case assembly. Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)
13577D
3.INSTALL LOCK PLATE
a.

*a Cylinder Block Sub-assembly Side *b Oil Jet
Install the lock plate with the bolt to the cylinder block sub-assembly. Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
HINT:
· Make sure the lock plate is facing the direction shown in the illustration.
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.