20.INSTALL SUPPLY PUMP SHAFT NUT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 20.INSTALL SUPPLY PUMP SHAFT NUT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev 18.TIGHTEN NO. 1 CHAIN VIBRATION DAMPER - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › 21.INSTALL CAMSHAFT TIMING SPROCKET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
ENGINE UNIT20.INSTALL SUPPLY PUMP SHAFT NUT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
20.INSTALL SUPPLY PUMP SHAFT NUT

*a Claw (Lower Side) *b Groove
Align the claw (lower side) of the gasket with the groove of the No. 1 chain tensioner assembly body to install the No. 1 chain tensioner assembly as shown in the illustration.
20.INSTALL SUPPLY PUMP SHAFT NUT
a. Temporarily install the crankshaft pulley and crankshaft pulley set bolt to the crankshaft.
b.

*a Hold
‹ Prev 18.TIGHTEN NO. 1 CHAIN VIBRATION DAMPER - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › 21.INSTALL CAMSHAFT TIMING SPROCKET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.