9.INSTALL CAMSHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 9.INSTALL CAMSHAFT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
9.INSTALL CAMSHAFT


*a Glove
Engine Front Side
Glove is at the rear end of the No. 2 camshaft.
a. Clean the No. 2 camshaft journals.
b. Apply a light coat of engine oil to the No. 2 camshaft journals of the cylinder head sub-assembly and the thrust portion of the No. 2 camshaft.
13511
9.INSTALL CAMSHAFT
a. Clean the camshaft journals.
b. Apply a light coat of engine oil to the camshaft journals of the cylinder head sub-assembly and the thrust portion of the camshaft.
c.

*a Knock Pin
Make sure the knock pins of the camshaft and No. 2 camshaft are facing the direction shown in the illustration.
10.INSTALL NO. 1 AND NO. 2 CAMSHAFT BEARING CAP
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.