4.INSTALL CYLINDER HEAD GASKET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 4.INSTALL CYLINDER HEAD GASKET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
4.INSTALL CYLINDER HEAD GASKET
· Make sure the end of the lock plate is holding the oil jet as shown in the illustration.

11115
4.INSTALL CYLINDER HEAD GASKET
11101
5.INSTALL CYLINDER HEAD SUB-ASSEMBLY
13750
6.INSTALL VALVE LASH ADJUSTER ASSEMBLY
a. Install the 16 valve lash adjuster assemblies to the cylinder head sub-assembly.
13801
7.INSTALL NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
a.

*1 No. 1 Valve Rocker Arm Sub-assembly *2 Valve Stem Cap *3 Valve Lash adjuster assembly
Check that the No. 1 valve rocker arm sub-assembly is firmly set to the valve lash adjuster assembly.
b. Apply a light coat of engine oil to the camshaft journals of the cylinder head sub-assembly and the thrust portion of the camshaft.
c. Install the 16 No. 1 valve rocker arm sub-assembly to the 16 valve lash adjuster assemblies.
13512
8.INSTALL NO. 2 CAMSHAFT
HINT:
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.