Es Description - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Es Description - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Es Description
ES–182
1GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM

| DTC | P0327 | Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor) |
|---|---|---|
| DTC | P0328 | Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor) |
| DTC | P0332 | Knock Sensor 2 Circuit Low Input (Bank 2) |
| DTC | P0333 | Knock Sensor 2 Circuit High Input (Bank 2) |
ES DESCRIPTION
A flat type knock sensor (non-resonant type) has a structure that can detect vibrations over a wide band of frequencies: between approximately 6 kHz and 15 kHz. Knock sensors are fitted onto the engine block to detect engine knocking. The knock sensor contains a piezoelectric element which generates a voltage when it becomes deformed. The voltage is generated when the engine block vibrates due to knocking. Any occurrence of engine knocking can be suppressed by delaying the ignition timing.
| DTC No. | DTC Detection Conditions | Trouble Areas |
|---|---|---|
| P0327 P0332 | Output voltage of knock sensor 1 or 2 is 0.5 V or less (1 trip detection logic) | • Short in knock sensor 1 or 2 circuit • Knock sensor 1 or 2 • ECM |
| P0328 P0333 | Output voltage of knock sensor 1 or 2 is 4.5 V or more (1 trip detection logic) | • Open in knock sensor 1 or 2 circuit • Knock sensor 1 or 2 • ECM |
HINT: When any of DTCs P0327, P0328, P0332 and P0333 are set, the ECM enters fail-safe mode. During fail- safe mode, the ignition timing is delayed to its maximum retardation. Fail-safe mode continues until the ignition switch is turned OFF. KNK1 Signal Waveform 1V/ DIV

GND
1 msec./ Division A085286E10 Reference: Inspection using an oscilloscope The correct waveform is as shown.
| Items | Contents |
|---|---|
| Terminals | KNK1 - EKNK or KNK2 - EKN2 |
| Equipment Settings | 0.01 to 10 V/Division, 0.01 to 10 msec./Division |
| Conditions | Keep engine speed at 4,000 rpm with warm engine |
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.