Install Camshaft - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Install Camshaft - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Install Camshaft
EM–64 1GR-FE ENGINE MECHANICAL – CAMSHAFT (for Bank 1) INSTALLATION

1.
INSTALL CAMSHAFT
NOTICE: Keep the camshaft level while it is being removed. The camshaft thrust clearance is very small and failing to keep it level could crack or damage the cylinder head journal surface, which receives the thrust. This could subsequently lead the camshaft to seize or break. Perform the following steps to avoid such problems. (a) Align the yellow mark link with the timing mark (1 dot mark) of the camshaft timing gear as shown in the Mark Links illustration. (b) Apply new engine oil to the thrust portion and journal of the camshafts. EM

Timing Mark A076518E03 (c) Temporarily install the No. 1 chain onto the No. 2 chain of the camshaft timing gear.

A076519E01 (d) Align the knock pin hole of the camshaft timing gear Knock Pin with the knock pin of the No. 1 camshaft, and insert the No. 1 camshaft into the camshaft timing gear. (e) Temporarily install the camshaft timing gear set bolt.

G036280E01 (f) Install the No. 1 camshaft onto the RH cylinder head with the cam lobes of the No. 1 cylinder facing downward as shown in the illustration.

G036281E01
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.