Active Safety - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Active Safety - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Active Safety
BC–87
BRAKE CONTROL – VEHICLE STABILITY CONTROL SYSTEM

SYSTEM DESCRIPTION
1.
SYSTEM DESCRIPTION
HINT:
• The skid control ECU forms a single unit with the hydraulic brake booster.
• The yaw rate sensor and deceleration sensor are combined in a single unit. This unit communicates with the skid control ECU through CAN communication. (a) ABS with EBD & BA & TRAC & VSC operation (1) The skid control ECU determines the wheel slipping conditions by receiving signals from each speed sensor, the yaw rate and deceleration sensor and the steering angle sensor. The ECU controls the engine output torque using electronic throttle control, and the wheel brake pressure using the brake actuator, according to these signals. (2) The SLIP indicator blinks and the skid control buzzer sounds to inform the driver that the VSC system is operating. The SLIP indicator also blinks when TRAC is operating, and the operation being performed is displayed.
2.
ACTIVE SAFETY
(a) ABS (Anti-lock Brake System) The ABS helps prevent the wheels from locking when the brakes are applied firmly or when braking on a slippery surface. BC
Hydraulic Brake Booster
Pump Motor Each Speed Sensor Each Speed Solenoid Valve Skid Control ECU Sensor
ABS Warning Light
C124752E01
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.