Vsv1 / Off. - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Vsv1 / Off. - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Vsv1 / Off.
IT–3
1GR-FE INTAKE – INTAKE SYSTEM

ON-VEHICLE INSPECTION
1.
INSPECT INTAKE AIR CONTROL FUNCTION

No. 1 Vacuum Switching Valve Intake Air Control Valve Assembly Assembly (VSV for ACIS)
A075983E02 (a) Remove the V-bank cover. (b) Warm up the engine. IT (c) Turn the ignition switch to OFF. (d) Connect the intelligent tester to the DLC3. Intelligent (e) Start the engine and allow it to idle. Tester (f) Turn the intelligent tester ON. (g) Select the following menu items: DIAGNOSIS /

ENHANCED OBD II / ACTIVE TEST / INTAKE CTL
VSV1 / ON. (1) Check that the intake air control valve is pulled out. DLC3
CAN VIM
If the intake air control valve does not operate, replace the VSV for ACIS or intake air surge G035612E02 tank. (h) Select the following menu items: DIAGNOSIS /
ENHANCED OBD II / ACTIVE TEST / INTAKE CTL
VSV1 / OFF.
(1) Check that the intake air control valve is returned to its original position. If the intake air control valve does not operate, replace the VSV for ACIS or intake air surge tank.
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.