Garnish Lh - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Garnish Lh - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Garnish Lh
ED–34 ENGINE HOOD / DOOR – FRONT DOOR (w/o Power Window) DISASSEMBLY

HINT: Use the same procedures for the RH and LH sides.
1.
DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2.
REMOVE FRONT DOOR WINDOW REGULATOR

HANDLE ASSEMBLY
(a) Pull out the snap ring with a cloth as shown in the illustration, then remove the door window regulator handle assembly.
ED
B088112 (b) Remove the window regulator handle plate.

B088113
3.
REMOVE FRONT DOOR LOWER FRAME BRACKET

GARNISH LH
(a) Disengage the 3 clips and remove the front door lower frame bracket garnish LH.
NOTICE: Confirm that no clips remain on the door panel when the garnish is removed. Transfer any remaining clips to the garnish side before installing. B088092E01
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.