Pressure Change - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Pressure Change - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Pressure Change
BR–32 BRAKE – HYDRAULIC BRAKE BOOSTER (w/ VSC)

ON-VEHICLE INSPECTION
1.
INSPECT BRAKE MASTER CYLINDER FLUID
PRESSURE CHANGE
(a) Inspect the battery positive voltage. Battery positive voltage: 10 to 14 V (b) Turn the ignition switch to OFF, and depress the brake pedal more than 20 times.
HINT: When pressure in the accumulator is released, the reaction force becomes lighter and the stroke becomes longer. (c) Install a LSPV gauge (SST) and brake pedal effort gauge, and bleed the air. Brake Pedal Effort Gauge SST 09709-29018 (d) When the booster does not operate: (1) Depress the brake pedal and check the fluid pressure. At 245 N (25 kgf, 55 lbf)

| Front brake pressure | Rear brake pressure | |
|---|---|---|
| 1,840 kPa (18.8 kgf/cm2, 267 psi) or more | 0 kPa (0 kgf/cm2, 0 psi) | |
| At 343 N (35 kgf, 77 lbf) | ||
| Front brake pressure | Rear brake pressure | |
| 2,710 kPa (27.6 kgf/cm2, 393 psi) or more | 0 kPa (0 kgf/cm2, 0 psi) |
SST
SST
(e) When the booster operates: (1) Turn the ignition switch to ON, and wait until the BR pump motor has stopped (step A).
HINT: Pump operating sound can be heard. F051234E01 (2) Turn the ignition switch to OFF, and depress the brake pedal more than 20 times (step B).
HINT: When pressure in the accumulator is released, the reaction force becomes lighter and the stroke becomes longer. (3) Repeat step A and B 5 times (step C). (4) Turn the ignition switch to ON, and check that the pump stops after approximately 8 to 14 seconds.
NOTICE: If the pump does not stop, repeat step C again. (5) Depress the brake pedal and check the fluid pressure. At 49 N (5 kgf, 11 lbf)
| Front brake pressure | Rear brake pressure |
|---|---|
| 770 to 1,280 kPa (7.9 to 13.1 kgf/cm2, 112 to 186 psi) | 800 to 1,330 kPa (8.2 to 13.6 kgf/cm2, 116 to 193 psi) |
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.