Straight Ahead - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Straight Ahead - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Straight Ahead
BC–311 BRAKE CONTROL – STEERING ANGLE SENSOR (w/ VSC)
STEERING ANGLE SENSOR (w/
VSC) REMOVAL
1. PRECAUTION (See page RS-1)
2.
DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL (a) Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
3.
PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4.
REMOVE STEERING WHEEL COVER LOWER NO. 2
(See page SR-9)
5.
REMOVE STEERING WHEEL COVER LOWER NO. 3
(See page SR-9)
6. REMOVE STEERING PAD ASSEMBLY (See page RS- 558)
7. REMOVE STEERING WHEEL ASSEMBLY (See page SR-9)
8. REMOVE STEERING COLUMN COVER LOWER (See page RS-566)
9. REMOVE STEERING COLUMN COVER UPPER (See page RS-566) BC
10. REMOVE SPIRAL CABLE (See page RS-566)
11. REMOVE STEERING SENSOR

(a) Release 6 claw fittings and remove the steering sensor from the spiral cable.
F050586E01 INSTALLATION

1.
INSTALL STEERING SENSOR
(a) Install the steering sensor onto the spiral cable.
NOTICE:
• Engage the claws securely.
• Be careful not to damage the claws.
2.
REMOVE PLACE FRONT WHEELS FACING
STRAIGHT AHEAD
F050586E01
3. INSTALL SPIRAL CABLE (See page RS-567)
4. CENTER SPIRAL CABLE (See page RS-567)
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.