38261E.pdf - INSTALL FRONT SHOE - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Brakes › 38261E.pdf - INSTALL FRONT SHOE - Toyota Land Cruiser J70 Workshop Manual
38261E.pdf - INSTALL FRONT SHOE

BRAKE SYSTEM — Rear Brake BR-49
INSTALL FRONT SHOE
7.
(a) Set the front shoe in place with the end of the shoe inserted in the wheel cylinder and the other end in the anchor plate. (b) Using SST, install the pin and shoe hold-down spring. SST 09718-00010
8R0701
INSTALL REAR SHOE
(a) Install the anchor spring between the front and rear shoes. (b) Set the rear shoe in place with the end of the shoe inserted in the wheel cylinder and the strut in place. (c) Using SST, install the pin and shoe hold-down spring. SST 09718-00010

Using SST, install the return spring. (d) SST 09703-30010 |

8RO711
CHECK OPERATION OF AUTOMATIC ADJUSTER

MECHANISM (a) Check that the adjusting bolt turns while pulling the parking brake lever up. If the bolt does not turn, check for incorrect installation of the rear brakes.
8R0706 (b) Adjust the strut to the shortest possible length. Install the drum. (c) (d) Pull the parking brake lever all the way up several times.
93602 80120
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTBrake padsSearch: Toyota Land Cruiser brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.