CHECK CLEARANCE BETWEEN BRAKE SHOES - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Brakes › CHECK CLEARANCE BETWEEN BRAKE SHOES - Toyota Land Cruiser J70 Workshop Manual
CHECK CLEARANCE BETWEEN BRAKE SHOES

BR-50 BRAKE SYSTEM — Rear Brake
CHECK CLEARANCE BETWEEN BRAKE SHOES AND
10.
DRUM Remove the drum. (a) Measure the brake drum inside diameter and diameter (b) of the brake shoes. Check that the difference be- tween the diameter is the correct shoes clearance. Shoe clearance:
0.6 mm (0.024 in.) If incorrect, check the parking brake system.
BROT14 BROOB2
IF NECESSARY, ADJUST BELLCRANK
11. (a) Lightly pull the bellcrank in direction A until there is no slack at part B. (b) In this condition, turn the adjusting bolt so that dimension C will be 0,2 — 0.7 mm (0.008 — 0.028 in.). (c) Lock the adjusting bolt with the lock nut.
Adjusting Bolt ero7ie (d) Connect the parking brake cable No. 2 to the bell- crank. (e) Install the tension spring.

BRo712
INSTALL BRAKE DRUM AND REAR WHEEL
12,
13.
FILL BRAKE RESERVOIR WITH BRAKE FLUID
AND BLEED BRAKE SYSTEM
(See page BR-6)
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTBrake padsSearch: Toyota Land Cruiser brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.