38261E.pdf - INSTALL RESERVOIR UNION - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Brakes › 38261E.pdf - INSTALL RESERVOIR UNION - Toyota Land Cruiser J70 Workshop Manual
38261E.pdf - INSTALL RESERVOIR UNION

BR-14 BRAKE SYSTEM — Master Cylinder
5.
INSTALL RESERVOIR UNION
(a) Apply lithium soap base glycol grease to the reservoir union. (b) Pack the lithium soap base glycol grease on the union (A).
{c) Install the union through the new O-ring. (d) Using a snap ring pliers, install the snap ring. {e) Install the boot.
87952
INSTALL RESERVOIR AND HOSE
Connect the hose to union and reservoir. (a) (b) Install the reservoir on the master cylinder with the “MAX” mark facing towrad the front. (c) Install the bolt and torque it. Torque: 250 kg-cm (18 ft-lb, 25 N-m)
03615
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTBrake padsSearch: Toyota Land Cruiser brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.