38261E.pdf - REAR BRAKE - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Brakes › 38261E.pdf - REAR BRAKE - Toyota Land Cruiser J70 Workshop Manual
38261E.pdf - REAR BRAKE

BRAKE SYSTEM — Rear Brake BR-44
REAR BRAKE
COMPONENTS Wheel Cylinder Assembly
Adjusting Lever Parking Brake Lever
Front Shoe —
Adjusting Spring -@ey<"
of GBs ¢ Anchor Spring Shoe Hold-down Spring ; oo
brake Drum
Cup
kg-cm (ft-lb, N-m)] : Specified torque @ = Non-reusable part an0co?|
REMOVAL OF REAR BRAKE
1.
REMOVE BRAKE DRUM
NOTE: If the brake drum cannot be removed easily, per- form the following steps: (a) Insert a hook through the hole in the backing plate, and hold the adjust lever away from the adjuster. (b) Using screwdriver, reduce the brake shoe adjustment by turning the adjuster. encsse
2.
REMOVE REAR BRAKE SHOE

(a) Using SST, remove the return spring adjuster from the rear shoe side. SST 09703-30010 (b) Using SST, remove the rear shoe hold-down spring and pin. SST 09718-00010 (c)_ Remove the rear brake shoe and anchor spring. ‘2noe89 aR0700)
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTBrake padsSearch: Toyota Land Cruiser brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.