DISASSEMBLY OF BRAKE BOOSTER - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Brakes › DISASSEMBLY OF BRAKE BOOSTER - Toyota Land Cruiser J70 Workshop Manual
DISASSEMBLY OF BRAKE BOOSTER

BRAKE SYSTEM — Brake Booster BR-17
DISASSEMBLY OF BRAKE BOOSTER
COMPONENTS Valve Body Front Body Body Seal Push Rod
Operating Rod Reaction Disc Diaphragm Spring ‘Stopper Key Clevis Felt Element ¢ he Circular Ring ae a) S Diaphragm Plate
(
‘Sponge Element @Body Seal Diaphragm kg-om (ft-lb, Nem)] : Specified torque @ =| Non-reusable part en
1.
REMOVE CLEVIS AND LOCK NUT
2.
SEPARATE FRONT AND REAR BODIES
(a) Place the matchmarks on the front and rear bodies. Set the booster in SST. (b) SST 09753-00012 and 09753-40010
CAUTION: Be careful not to tighten the two nuts of SST too tightly. (c)_ Turn the front body clockwise until the front and uJ rear bodies separate. Loosen the upper left and right nuts of the SST, and (d) insert pieces of wood between the front body and upper plate.
CAUTION: Be careful that pieces of wood do not con- tact the rear body. (e) Evenly tighten down the four booster mounting nuts to separate the front and rear bodies. (f) Remove the diaphragm spring and push rod.

3.
REMOVE BOOT FROM REAR BODY
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTBrake padsSearch: Toyota Land Cruiser brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.