ASSEMBLY OF REAR BRAKE - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Brakes › ASSEMBLY OF REAR BRAKE - Toyota Land Cruiser J70 Workshop Manual
ASSEMBLY OF REAR BRAKE

BRAKE SYSTEM — Rear Brake BR-47
ASSEMBLY OF REAR BRAKE
(See page BR-43)
NOTE: Assemble the parts in the direction shown.
Left Wheel Right Wheel 880706 8R0707,
IF NECESSARY, ASSEMBLE AND INSTALL WHEEL
1. CYLINDER Apply lithium soap base glycol grease to the piston (a) cups and piston. Install the spring and two piston cups in the wheel cylinder. Make sure the flanges of the cups are pointed inward. Apply lithium soap base glycol Install two pistons. (b) grease as shown, and install the two boots. Grease
Install the wheel cylinder on the backing plate with
(c) R007! two bolts. Using SST, connect the brake line. (d) SST 09751-36011 Torque: 155 kg-cm (11 ft-lb, 15 N-m) 74
81042
IF NECESSARY, ASSEMBLE AND INSTALL
2.
BELLCRANK ASSEMBLY
Apply high-temperature type grease to the rotating
(a) parts of the bellcrank. Install the bellcrank to the bracket with a new C- (b) washer. Apply lithium soap base glycol grease to the seal lip. (c)
R076
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTBrake padsSearch: Toyota Land Cruiser brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.