38261E.pdf - Specified torque - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Steering › 38261E.pdf - Specified torque - Toyota Land Cruiser J70 Workshop Manual
38261E.pdf - Specified torque

STEERING — Power Steering SR-37 COMPONENTS
: Specified torque
cm (ft-lb, N-m)]
oN
Front Housing
[470 (34, 46)
: Non-reusable part
Snap Ring
Gym o-Ri Rotor Shaft 9 é \
Oil Seal
- ing { )
Bearing @ Snap Ring
@ Snap =~ —o}
O-Ring
Valve Seat + =@ Ce
Spring Flow Control Valve @ O-Ring
sen) XS OY Spring
Pressure Port Union
Rear Housing Rear Plate Vane Plate $n0198
DISASSEMBLY OF POWER STEERING PUMP
1.
CLAMP POWER STEERING PUMP IN VISE
CAUTION: Do not overtighten the vice more than neces- sary.
2.
REMOVE SUCTION PORT UNION FROM REAR
HOUSING
3.
REMOVE FRONT HOUSING
(a) Place matchmarks on the front and rear housing. (b) Remove the four front housing bolts. (c) Using a plastic hammer, tap off the front housing.
CAUTION: Be careful that the vane plates, rotor and cam ring do not fall out.
sr0199
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Toyota power steering fluid
As an Amazon Associate we earn from qualifying purchases.