INSPECTION AND REPAIR - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Steering › INSPECTION AND REPAIR - Toyota Land Cruiser J70 Workshop Manual
INSPECTION AND REPAIR
STEERING — Steering Column Assembly with Tilt Steering SR-10

INSPECTION AND REPAIR OF
] |
STEERING COLUMN ASSEMBLY
1.
IF NECESSARY, REPLACE LOWER BEARING
Using SST and a press, remove the lower bearing from (a) the main shaft. SST 09527-20011 (b) Pack MP grease into the bearing.
sroia4 ({c) Using SST and a press, assemble the lower bearing and main shaft. SST 09236-00101 and 09612-22011
SRO15
IF NECESSARY, REPLACE INTERMEDIATE SHAFT
BEARING (a) Using snap ring pliers, remove the snap ring. (b) Pull out the bearing from the intermediate shaft.
(c) Install the bearing. Using snap ring pliers, install the snap ring. (d)
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Toyota power steering fluid
As an Amazon Associate we earn from qualifying purchases.