DISASSEMBLY OF GEAR HOUSING - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Steering › DISASSEMBLY OF GEAR HOUSING - Toyota Land Cruiser J70 Workshop Manual
DISASSEMBLY OF GEAR HOUSING

STEERING — Steering Gear Housing SR-21 COMPONENTS 450 (33, 44) @ g 1,150 (83, 113) ® Sector Shaft End Cover
<\—— Sector Shaft Thrust Washer Adjusting Screw Sector Shaft %& Adjusting Screw Worm Bearing Oil Seal Worm Assembly ® 3 4 Adjusting Screw Lock Nut 1,500 (108, 147)
=a Bearing
©>)— oil seal Pitman Arm kg-cm (ft-lb, N-m)] : Specified torque <>) @ : Non-reusable part L* : Precoated part sR1028
DISASSEMBLY OF GEAR HOUSING
1,
REMOVE BREATHER PLUG AND DRAIN GEAR
OIL
DISCONNECT PITMAN ARM FROM GEAR
HOUSING (a) Remove the pitman arm set nut. Using SST, disconnect the pitman arm from the gear (b) housing. sR1079 SST 09628-62011
REMOVE END COVER
(a) Remove the adjusting screw lock nut and four nuts.
$1080
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Toyota power steering fluid
As an Amazon Associate we earn from qualifying purchases.