REMOVE SECTOR SHAFT - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Steering › REMOVE SECTOR SHAFT - Toyota Land Cruiser J70 Workshop Manual
‹ Prev DISASSEMBLY OF GEAR HOUSING - Toyota Land Cruiser J70 Workshop ManualNext › 38261E.pdf - Steering: INSPECTION AND REPAIR OF STEERING GEAR - Toyota Land Cruiser J70 Workshop Manual
Toyota Land Cruiser J70REMOVE SECTOR SHAFT - Toyota Land Cruiser J70 Workshop Manual
REMOVE SECTOR SHAFT

STEERING — Steering Gear Housing SR-22 (b) Remove the end cover by turning the adjusting screw clockwise.

REMOVE SECTOR SHAFT
(a) Using a plastic hammer, tap out the sector shaft. (b) Remove the sector shaft.
REMOVE WORM BEARING ADJUSTING SCREW
SST
LOCK NUT
Using SST, remove the lock nut. SST 09617-60010
REMOVE WORM BEARING ADJUSTING SCREW
Using SST, remove the adjusting screw. SST 09616-30020
REMOVE WORM SHAFT
Pull the worm shaft out of the gear housing.
CAUTION: Do not disassemble the ball nut from the steering worm shaft. Do not allow the ball nut to hit the end of the worm shaft.

‘30019 $ROOZ0
Donated by Onur Azeri . cruisercult.com
‹ Prev DISASSEMBLY OF GEAR HOUSING - Toyota Land Cruiser J70 Workshop ManualNext › 38261E.pdf - Steering: INSPECTION AND REPAIR OF STEERING GEAR - Toyota Land Cruiser J70 Workshop Manual
Parts & tools for this job For Toyota Land Cruiser
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Toyota power steering fluid
As an Amazon Associate we earn from qualifying purchases.