• Astra J Workshop Manual
  • Preface
  • General Information
  • Body Hardware and Trim
  • Body Repair
  • Technical Service Bulletins
  • Bumpers and Fascias
  • Collision Repair
  • Bolted Exterior Body Panels and Closures
  • Frame and Underbody
  • Paint and Coatings
  • Repair Instructions
  • Paint Information on the Vehicle Identification Plate
  • Overview of Paint Repair Pictograms
  • Blending System
  • Brief description of blend-in painting (two-coat paint applications)
  • Brief description of touch-in painting (two-coat paint applications)
  • Paint Systems
  • Paint Stages
  • Time Allowances (hrs)
  • Production Painted Plastic Parts (Exterior)
  • Operations - General
  • Step A - Observe Service Literature and Safety Measures
  • Step B - Prepare Workshop Equipment, Aids
  • Overview of Paint Systems (Individual Part Paint Application / Blend-in Painting / Touching-up)
  • System 1, 2-C Acrylic-coat for 1-coat Paint Applications
  • System 3, Top 2-coat Base Metallic for 2-coat Paint Applications
  • System 4, Water Base Coat for 2-coat Solid Paint Applications
  • System 5, Top 2-coat Metallic Base Coat for 2-coat Paint Applications
  • System 6, 2-C Acrylic-coat for 1-coat Paint Applications
  • System 8, Top 2-coat Base Metallic for 2-coat Paint Applications
  • System 9, Water Base Coat for 2-coat Paint Applications
  • Introduction
  • General
  • System 2, VOC Coat for 1-coat Paint Applications
  • System 7, VOC Coats for 1-coat Paint Applications
  • System 10, VOC Coat for 1-coat Paint Applications
  • System 11, Water Base Coat for 2-coat Paint Applications
  • System 12, Two-colour Paint Applications on Plastic Surfaces
  • Brief description of blend-in painting (three-coat paint applications)
  • Brief description of touch-in painting (three-coat paint applications)
  • Contents of the publication 'Paint repair systems'
  • Product Version
  • Sanding means for various operations
  • VOC guideline - background information
  • System 13, Painting individual parts for 1-coat paint application (metal, aluminium)
  • System 14, Painting individual parts for 2-coat paint application (metal, aluminium)
  • System 15, Blend-in painting / touching up for 2-coat paint application (metal)
  • System 16, Individual part painting for 2-coat paint application (plastic)
  • System 17, Two-colour paint applications on plastic surfaces
  • Practical tips
  • Technical Service Bulletins
  • Body Systems
  • General Vehicle Information
  • Brakes
  • Diagnostic Navigation
  • Driveline/Axle
  • Driver Information and Entertainment
  • Engine
  • HVAC
  • Power and Signal Distribution
  • Roof
  • Safety and Security
  • Seats
  • Steering
  • Suspension
  • Transmission/Transaxle