- Astra J Workshop Manual
- Preface
- General Information
- Body Hardware and Trim
- Body Repair
- Technical Service Bulletins
- Bumpers and Fascias
- Collision Repair
- Bolted Exterior Body Panels and Closures
- Frame and Underbody
- Paint and Coatings
- Repair Instructions
- Paint Information on the Vehicle Identification Plate
- Overview of Paint Repair Pictograms
- Blending System
- Brief description of blend-in painting (two-coat paint applications)
- Brief description of touch-in painting (two-coat paint applications)
- Paint Systems
- Paint Stages
- Time Allowances (hrs)
- Production Painted Plastic Parts (Exterior)
- Operations - General
- Step A - Observe Service Literature and Safety Measures
- Step B - Prepare Workshop Equipment, Aids
- Overview of Paint Systems (Individual Part Paint Application / Blend-in Painting / Touching-up)
- System 1, 2-C Acrylic-coat for 1-coat Paint Applications
- System 3, Top 2-coat Base Metallic for 2-coat Paint Applications
- System 4, Water Base Coat for 2-coat Solid Paint Applications
- System 5, Top 2-coat Metallic Base Coat for 2-coat Paint Applications
- System 6, 2-C Acrylic-coat for 1-coat Paint Applications
- System 8, Top 2-coat Base Metallic for 2-coat Paint Applications
- System 9, Water Base Coat for 2-coat Paint Applications
- Introduction
- General
- System 2, VOC Coat for 1-coat Paint Applications
- System 7, VOC Coats for 1-coat Paint Applications
- System 10, VOC Coat for 1-coat Paint Applications
- System 11, Water Base Coat for 2-coat Paint Applications
- System 12, Two-colour Paint Applications on Plastic Surfaces
- Brief description of blend-in painting (three-coat paint applications)
- Brief description of touch-in painting (three-coat paint applications)
- Contents of the publication 'Paint repair systems'
- Product Version
- Sanding means for various operations
- VOC guideline - background information
- System 13, Painting individual parts for 1-coat paint application (metal, aluminium)
- System 14, Painting individual parts for 2-coat paint application (metal, aluminium)
- System 15, Blend-in painting / touching up for 2-coat paint application (metal)
- System 16, Individual part painting for 2-coat paint application (plastic)
- System 17, Two-colour paint applications on plastic surfaces
- Practical tips
- Technical Service Bulletins
- Body Systems
- General Vehicle Information
- Brakes
- Diagnostic Navigation
- Driveline/Axle
- Driver Information and Entertainment
- Engine
- HVAC
- Power and Signal Distribution
- Roof
- Safety and Security
- Seats
- Steering
- Suspension
- Transmission/Transaxle