Removal (page 13 of 15)
- Make
- Alfa Romeo
- Model
- 155 Factory Service Manual
- Year
- 1992–1998
- Section
- Removal
Engine – mechanical (Twin Spark)Removal · page 13 of 15
- Unscrew the nut securing the articulated joint pin of the side steering tie-rod - left-hand side.
- Remove the steering tie-rod from the control lever on the support using tool N° 1.821.169.000 (A.3.0633).
- Loosen the two bolts securing the support to the front right shock absorber and remove only the upper bolt.
- Tip the wheel hub as far forward as possible which will also move the axleshaft forward.
- Operate on the right-hand side as for the left to move the axleshaft forward from its support.
- Remove the forward section of the exhaust pipe (see GROUP 04).
Parts & tools for this job For 1992 Alfa Romeo 155
- PARTEngine gasket setSearch: Alfa Romeo 155 1992 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.