Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat 500 Factory Service Manual (2007-2024)22 · Fault diagnosis
22 · Diagnostics

Rear seat backrest adjustment stiff

Make
Fiat
Model
500 Factory Service Manual
Year
2007–2024
Section
Seats › Rear seat backrest adjustment stiff
Fault diagnosisRear seat backrest adjustment stiff

REAR SEAT BACKREST ADJUSTMENT STIFF

1.2 8v, 1.3 Multijet, 1.4 16v

Hardening/squeaking of backrest when folding over

Test results
1MOVEMENT OF LOWER FASTENINGS CHECKAll OKProblems encounteredOperation
Check that the lower backrest fastenings on the vehicle move freely (quick coupling to wheel compartment)Move on to Step 2Interference with foreign objects or with fastening elements.Remove the causes of the interference
2MATCHING BETWEEN BACKREST AND VEHICLE INTERIOR TRIM CHECKAll OKProblems encounteredOperation
Check the matching of the backrest with the vehicle interior trim (wheel arch liners, door panels, etc.) by folding the backrest over.Move on to Step 3Interference with trims.Reposition the trims and/or carry out the correct backrest fitting cycle.
3CENTRE BRACKET CONDITION CHECKAll OKProblems encounteredOperation

Check the condition and conformity of the centre bracket (for the split seat).

Also check that there is no knocking.

Move on to Step 4No plastic bush on the rotation pin.Remove the backrest and fit the plastic noise prevention bush.
4CENTRE BRACKET CORRECT FASTENING CHECKAll OKProblems encounteredOperation
Check that the fastening of the centre bracket with the backrest structure and with the floor is correct.Move on to Step 5Incorrect fastening of bracket with backrest and/or with floor.Retighten the centre bracket to the backrest and/or the floor to the correct torque.
5CORRECT OPERATION CHECKAll OKProblems encounteredOperation
Check that the fault is no longer present.End of diagnosisThe fault persists

Replace the left backrest

Op. 7045A13 FRONT SEAT WITH SIDE BAG (ONE) LEFT OR RIGHT - R.R.

Replace the right backrest

Op. 7045A15 R R HANDLE FOR FRONT SEAT FORE AND AFT ADJUSTMENT

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.