Seat belt does not lock
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Seats › Seat belt does not lock
SEAT BELT DOES NOT LOCK
The seat belt will not lock even when the belt is suddenly tugged out.
| Test results | ||||
| 1 | LOCKING DEVICE CHECK | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Pull the belt out suddenly to check that the inertia reel locks. Also check that the reel is fitted correctly. | Move on to Step 2 | 1. The strap of one front belt does not lock 2. The strap of one rear belt does not lock 3. Incorrect installation. | 1. Replace the front seat belt. Op. 7065A12 FRONT SEAT BELT (ONE), LEFT OR RIGHT, WITH PRETENSIONER ON REEL - R.R 2. Replace the rear seat belt. Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R. 3. Proceed as instructed in the. | |
| 2 | ROAD TEST | All OK | Problems encountered | Operation |
| Carry out a road test and check whether the belt locks following a sudden braking manoeuvre. | End of diagnosis | 1. The front belt does not lock. 2. The rear belt does not lock. | 1. Replace the front seat belt. Op. 7065A12 FRONT SEAT BELT (ONE), LEFT OR RIGHT, WITH PRETENSIONER ON REEL - R.R 2. Replace the rear seat belt. | |
Parts & tools for this job For 2007 Fiat 500
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.