Engine lubrication
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Engine › Engine lubrication
Manufacturing data and tolerancesEngine lubrication
ENGINE LUBRICATION
| Measurement | Value | Validity |
|---|---|---|
| Radial clearance between pump casing and driven gear (mm) | 0.080 ÷ 0.186 | 1.2 8V |
| Height of relief valve spring (valve opening) with test load of 8 - 8.8 daN (mm) | 55.0 | 1.2 8V |
| Height of engine oil pressure relief valve spring (valve completely open) with test load of 13.2 daN (mm) | 47.575 | 1.2 8V |
| Length of engine oil pressure limit valve spring (mm) | 77.396 | 1.2 8V |
| Radial clearance between pump casing and driven gear (mm) | 0.1÷ 0.23 | 1.3 Mjet |
| Endfloat between the pump casing support plane and the top of the gears (mm) | 0.025 ÷ 0.075 | 1.3 Mjet |
| Height of engine oil pressure relief valve spring with test load of 5.44 - 6.02 daN (mm) | 36.0 | 1.3 Mjet |
| Radial clearance between pump casing and driven gear (mm) | 0.100 ÷ 0.210 | 1.4 16V |
| Endfloat between the pump casing support plane and the top of the gears (mm) | 0.025 ÷ 0.070 | 1.4 16V |
| Height of relief valve spring (valve opening) with test load of 11.73 - 12.51 daN (mm) | 35.0 | 1.4 16V |
Parts & tools for this job For 2007 Fiat 500
- PARTEngine gasket setSearch: Fiat 500 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.