Timing system
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Engine › Timing system
Manufacturing data and tolerancesTiming system
TIMING SYSTEM
| Measurement | Value | Validity |
|---|---|---|
| Inlet valve clearance in closed position (mm) | 0.3 | 1.2 8V |
| Exhaust valve clearance in closed position (mm) | 0.4 | 1.2 8V |
| Measurement | Value | Validity |
|---|---|---|
| Camshaft endfloat (mm) | 0.10 ÷ 0.29 | 1.4 16V |
| Camshaft bearing diameter - First bearing (mm) | 35.000 ÷ 35.002 | 1.4 16V |
| Camshaft bearing diameter - Second bearing (mm) | 48.000 ÷ 48.002 | 1.4 16V |
| Camshaft bearing diameter - Third bearing (mm) | 49.000 ÷ 49.002 | 1.4 16V |
| Nominal inlet cam lift (mm) | 8.00 | 1.4 16V |
| Nominal exhaust cam lift (mm) | 7.05 | 1.4 16V |
Parts & tools for this job For 2007 Fiat 500
- PARTEngine gasket setSearch: Fiat 500 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.