FRONT ANTI-ROLL BAR CHECKS

Check 4410CA

1.2 8v, 1.3 Multijet, 1.4 16v

Position the vehicle on a two column lift.

Raise the vehicle and check that the anti-roll bar is correctly positioned (transversely) in relation to the centre line.

Check that the paint is not worn at the contact points between the bar and the wishbones.

Using a torque wrench calibrated to the recommended value, check that the fastenings securing the anti-roll bar to crossmember (1) are tightened to the recommended torque.

Using a torque wrench calibrated to the recommended value, check that the fastenings securing the connecting rod to bar (2a) and to shock absorber (2b) are tightened to the recommended torque.