1032 timing system
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- 10 engine › 1032 timing system
Tightening torques1032 timing system
1032 TIMING SYSTEM
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Toothed drive pulley (on crankshaft) | Bolt | M12x1x46 (left) | 2.0 + 90° | 1.2 8V |
| Toothed drive pulley (on crankshaft) | Bolt | M11x1x44.3 (left) | 2.0 + 90° | 1.2 8V |
| Toothed drive pulley (on crankshaft) | Bolt | M14x1.25x60 (left) | 5.0 + 90° | 1.3 Multijet |
| Toothed drive pulley (on crankshaft) | Bolt | M12x1x46 (left) | 2.0 + 110° | 1.4 16V |
| Toothed driven pulley | Bolt | M12x1.25x40 | 12.0 | 1.4 16V |
| Toothed driven pulley | Bolt | M12x1.25x33 | 15.0 | 1.3 Multijet |
| Toothed driven pulley | Bolt | M10x1.25x35 | 7.0 | 1.2 8V |
| Timing chain pad | Bolt | M8x1.25x15 | 2.5 | 1.3 Multijet |
| Timing belt upper guard (on camshaft housing) | Bolt | M8x1.25x40 | 2.5 | 1.4 16V |
| Timing belt upper guard (on camshaft housing) | Bolt | M8x1.25x65 | 2.5 | 1.4 16V |
| Timing belt lower guard (on oil pump) | Bolt | M6x1x25 | 0.9 | 1.4 16V |
| Timing belt side guard (on cylinder head) | Bolt | M8x1.25x14 | 2.5 | 1.4 16V |
Parts & tools for this job For 2007 Fiat 500
- PARTEngine gasket setSearch: Fiat 500 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.