1072 intake and exhaust manifolds
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- 10 engine › 1072 intake and exhaust manifolds
Tightening torques1072 intake and exhaust manifolds
1072 INTAKE AND EXHAUST MANIFOLDS
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Exhaust manifold (on cylinder head) | Nut | M8 | 1.0 + 60° | 1.2 8v 1.4 16V |
| Exhaust manifold (on cylinder head) | Nut | M8x1.25 | 1.5 + 30° | 1.3 Multijet |
| Exhaust manifold (on camshaft housing) | Plug | M18x1.5 | 3.0 | 1.4 16V |
| Exhaust manifold heat shield (on exhaust manifold) | Bolt | M6 | 0.9 | 1.2 8v 1.4 16V |
| Exhaust manifold heat shield (on exhaust manifold) | Nut | M6x1 | 0.9 | 1.3 Multijet |
| Exhaust manifold heat shield (on catalytic converter) | Nut | M6 | 0.9 | 1.2 8v 1.4 16V |
| Exhaust manifold heat shield to exhaust manifold | Nut | M6 | 0.8 | 1.4 16V |
| Flange securing catalytic converter to flexible section | Nut | M8 | 2.5 | 1.4 16V |
| Intake manifold (on cylinder head) | Bolt | M8x1.25x45 | 2.5 | 1.2 8V |
| Intake manifold (on cylinder head) | Bolt | M8x1.25x35 | 2.5 | 1.2 8V |
| Intake manifold (on cylinder head) | Nut | M8x1.25 | 2.5 | 1.2 8V |
| Intake manifold (on cylinder head) | Bolt | M8x1.25x65 | 2.5 | 1.3 Multijet |
| Intake manifold (on cylinder head) | Bolt | M8x1.25x20 | 2.5 | 1.3 Multijet |
| Intake manifold (on cylinder head) | Bolt | M7x1x42 | 1.5 | 1.4 16V |
| Intake manifold (on cylinder head) | Bolt | M7x1x47 | 1.5 | 1.4 16V |
| Intake manifold (on camshaft housing) | Bolt | M6x1x30 | 0.9 | 1.4 16V |
Parts & tools for this job For 2007 Fiat 500
- PARTExhaust gasketSearch: Fiat 500 2007 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.