HEATER PLUGS CONTROL UNIT - R.R

Operation 5520C20 · COLD STARTING SYSTEM (DIESEL ENGINES)

1.9 JTD 8v, 1.9 JTD 16v

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Undo nut (1a) fixing preheating control unit (1b) to the partition and rotate it to access the electrical connections.

1. Undo nut (1a) and disconnect earth lead (1b).

2. Disconnect electrical connections (2a) and (2b), remove the control unit.

Refitting

- Check that the glow heater plug preheating control unit is not damaged.

- Connect the electrical connections and tighten the nut securing the earth lead.

- Refit the control unit on the partition and tighten the nut.

Op. 1016A10 SOUND-PROOFING COVER - R.R