HYDRAULIC TAPPET (ONE) - REPLACE WITH CAMSHAFT HOUSING REMOVED

Operation 1036H55 · TAPPETS AND ROCKER SHAFTS

1.9 JTD 16v

Removing

1. Remove the hydraulic tappet assembly (1a) and rocker arms (1b).

2. Separate the hydraulic tappet from the rocker arm, removing the fastening clip.

Arrange the hydraulic tappets on a surface free of impurities and also mark their positions on removal so that they can be refitted in the correct position.

Refitting

- Fit the new tappet in the rocker arm housing and fasten it using a new securing spring.

- Fit the tappet - rocker arm assembly in the housing in the cylinder head.