CAMSHAFT SEAL SUPPORT IN CAMSHAFT HOUSING - R.R.

Operation 1036L40 · CAMSHAFTS (2) IN CAMSHAFT HOUSING (1)

1.4 16v

Removing

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R

1. Open the wiring retaining band.

2. Undo the bolts (2a) and remove the camshaft seal rear cover (2b) with gasket.

Refitting

- Place the camshaft rear cover in its housing with its gasket and secure it using the bolts.

- Close the wiring retaining band.

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

1.4 16v TJet

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.

Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R

Op. 1048B58 TURBOCHARGER AIR BY-PASS VALVE - R.R.

1. Undo the fastenings (1a) and remove the bracket (1b).

1. Undo the nuts (1a) and remove the camshaft seal rear cover (1b) with gasket.

Refitting

- Place the camshaft rear cover in its housing complete with new gasket and tighten the nuts.

- Place the wiring mounting bracket in its housing and tighten the fastenings.

Op. 1048B58 TURBOCHARGER AIR BY-PASS VALVE - R.R.

Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R

Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.

Op. 1016A10 SOUND-PROOFING COVER - R.R