TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Operation 1032D12 · TIMING SYSTEM PROTECTIONS

1.9 JTD 16v

Removing

- Position the vehicle on a lift.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - R + R

1. Undo the fixing bolts (1a) and remove the lower protective timing cover (1b).

1. Undo the fixing bolts (1a) and remove the front upper protective timing cover (1b).

1. Undo the bolts securing the rigid degassing pipe.

- Open the engine wiring retaining bands.

2. Loosen the band and disconnect the degassing pipe from the engine coolant reservoir.

1. Undo the bolts securing the coolant reservoir.

1. Undo the fixing bolts (1a) and remove the rear upper protective timing cover (1b).

Refitting

- Fit the rear upper timing belt covers and secure them using the bolts.

- Tighten the bolts securing the coolant reservoir.

- Connect the degassing pipe to the engine coolant reservoir and tighten the band.

- Tighten the bolts securing the rigid degassing pipe.

- Fit the front upper timing belt covers and secure them using the bolts.

- Refit the lower timing belt covers and secure them using the bolts.

Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - R + R

Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Remove the vehicle from the lift.