TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.

Operation 1032D26 · TIMING SYSTEM PROTECTIONS

1.4 16v

Removing

1. Undo the bolts and remove the upper protective timing cover.

Refitting

- Fit the upper timing belt covers and secure them using the bolts.

1.9 JTD 8v

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Disconnect the rapid connector (1a), open the fuel return pipe (1c) retaining clip (1b) and move it to one side.

2. Loosen the band and disconnect the flexible degassing pipe from the rigid pipe.

3. Unscrew the engine coolant reservoir fixing bolts and move it aside.

1. Undo the bolts (1a) and remove the upper protective cover (1b).

Refitting

- Place the upper protective cover back in its housing and tighten the bolts.

- Fit the engine cooling supply reservoir in place and secure it using the bolts.

- Connect the flexible degassing pipe to the rigid pipe and tighten the band.

- Refit the fuel return pipe, connect the rapid connector and close the retaining clip.

Op. 1016A10 SOUND-PROOFING COVER - R.R

1.9 JTD 16v

- Refer to

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

1.4 16v TJet

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Undo retaining bolts (1a) and remove front upper protective timing drive belt cover (1b).

Refitting

- Fit the front upper timing drive belt cover and secure it using the bolts.

Op. 1016A10 SOUND-PROOFING COVER - R.R