Crankshaft and flywheel
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine › Crankshaft and flywheel
Tightening torquesCrankshaft and flywheel
CRANKSHAFT AND FLYWHEEL
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine flywheel | Bolt (to be replaced) | M8 | 1.4 ÷ 1.6 + 45° | 1.4 16v |
| Engine flywheel | Bolt (to be replaced) | M12 | 14.4 ÷ 17.6 | 1.9 JTD |
| Engine flywheel | Bolt (to be replaced) | M9 | 1.9 ÷ 2.1 + 50° +/- 2° | 1.4 16v TJet |
| Bearing caps | Bolt | M12 | 1.9 ÷ 2.1 + 100° | 1.9 JTD 16v |
| Bearing caps | Bolt | M12 | 2.4 ÷ 2.6 + 100° | 1.9 JTD 8v |
Parts & tools for this job For 2007 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.