Emission control system
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine › Emission control system
Tightening torquesEmission control system
EMISSION CONTROL SYSTEM
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Lambda sensor | M18 | 4.1 ÷ 5.0 | 1.4 16v | |
| Lambda sensor | M18 | 4.0 ÷ 5.0 | 1.9 JTD | |
| Thermocouple signalling catalytic converter overheating | Connector | M14 | 4.1 ÷ 5.0 | 1.9 JTD |
| Exhaust gas temperature sensor on particle filter | Connector | M14 | 4.0 ÷ 5.0 | 1.9 JTD |
| E.G.R. system solenoid | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 JTD |
| Catalytic converter | Collar nut | M10 | 2.2 ÷ 2.6 | 1.9 JTD |
| Catalytic preconverter | Collar nut | M10 | 2.2 ÷ 2.6 | 1.9 JTD |
| Oil vapour separator bracket - intake chamber side | Bolt | M6 | 0.8 ÷ 1.0 | 1.9 JTD 16v |
| Oil vapour separator bracket - injection pump mounting side | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 JTD 16v |
| E.G.R. exhaust gas heat exchanger | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 JTD |
| Catalytic converter mounting bracket | Bolt | M8 | 2.3 ÷ 2.8 | 1.4 16v TJet |
Parts & tools for this job For 2007 Fiat Bravo
- PARTExhaust gasketSearch: Fiat Bravo 2007 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.