Intake and exhaust manifolds
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine › Intake and exhaust manifolds
Tightening torquesIntake and exhaust manifolds
INTAKE AND EXHAUST MANIFOLDS
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Air chamber - cylinder head side | Bolt (to be replaced) | M7 | 1.3 ÷ 1.6 | 1.4 16v |
| Air chamber - camshaft housing side | Bolt (to be replaced) | M6 | 0.8 ÷ 1.1 | 1.4 16v |
| Air chamber | Nut | M8 | 2.3 ÷ 2.8 | 1.9 JTD |
| Air chamber | Bolt (to be replaced) | M7 | 1.3 ÷ 1.6 | 1.4 16v TJet |
| Exhaust manifold | Nut | M8 | 1.4 ÷ 1.6 + 30° +/- 3° | 1.4 16v |
| Exhaust manifold - turbocharger side | Nut (to replace) | M8 | 2.3 ÷ 2.8 | 1.9 JTD |
| Intake manifold | Nut | M8 | 2.3 ÷ 2.8 | 1.9 JTD 16v |
| Exhaust manifold heat shield | Nut | M6 | 0.8 ÷ 1.0 | 1.4 16v TJet |
| Swirl actuator | Bolt | M6 | 0.8 ÷ 1.0 | 1.9 JTD 16v |
Parts & tools for this job For 2007 Fiat Bravo
- PARTExhaust gasketSearch: Fiat Bravo 2007 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.