Diesel injection system
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine › Diesel injection system
Tightening torquesDiesel injection system
DIESEL INJECTION SYSTEM
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water presence - fuel temperature sensor | 0.2 ÷ 0.3 | 1.9 JTD | ||
| Injector brackets | Nut | M8 | 2.7 ÷ 3.3 | 1.9 JTD 8v |
| Injector brackets | Nut | M8 | 2.3 ÷ 2.8 | 1.9 JTD 16v |
| Pipe from pressure pump to fuel manifold - pressure pump side | Connector | M12 | 2.2 ÷ 2.4 | 1.9 JTD |
| Pipe from pressure pump to fuel manifold - fuel manifold side | Connector | M14 | 1.8 ÷ 2.0 | 1.9 JTD |
| Pipes from fuel manifold to injectors - fuel manifold side | Connector | M14 | 1.8 ÷ 2.0 | 1.9 JTD |
| Pipes from fuel manifold to injectors - injectors side | Connector | M12 | 2.2 ÷ 2.4 | 1.9 JTD |
| Fuel pressure sensor - fuel manifold side | 6.5 ÷ 7.5 | 1.9 JTD | ||
| Common rail | Nut | M8 | 2.3 ÷ 2.8 | 1.9 JTD 8v |
| Common rail | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 JTD 16v |
| Pressure pump | Nut | M8 | 2.3 ÷ 2.8 | 1.9 JTD |
| Pressure pump drive pulley | Nut | M14 | 4.5 ÷ 5.5 | 1.9 JTD |
| Engine coolant temperature sensor | M12 | 1.8 ÷ 2.2 | 1.9 JTD | |
| Rpm sensor | Bolt | M6 | 0.8 ÷ 1.0 | 1.9 JTD |
| Cam angle sensor | Bolt | M6 | 0.8 ÷ 1.0 | 1.9 JTD |
| Throttle body | Bolt | M6 | 0.6 ÷ 0.9 | 1.9 JTD 8v |
| Throttle body | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 JTD 16v |
| Pressure pump support | Bolt (to be replaced) | M8 | 2.3 ÷ 2.8 | 1.9 JTD |
| Pressure pump support | Bolt (to be replaced) | M6 | 2.3 ÷ 2.8 | 1.9 JTD |
| Pressure pump support | Bolt | M10 | 4.5 ÷ 5.5 | 1.9 JTD |
Parts & tools for this job For 2007 Fiat Bravo
- PARTGlow plugsSearch: Fiat Bravo 2007 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.