Engine cooling
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine › Engine cooling
Tightening torquesEngine cooling
ENGINE COOLING
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Thermostat | Bolt | M6 | 0.9 ÷ 1.1 | 1.4 16v |
| Thermostat | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 JTD |
| Water pump | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 JTD |
| Water pump | Bolt | M6 | 0.9 ÷ 1.1 | 1.4 16v |
| Water pump | Nut | M6 | 0.9 ÷ 1.1 | 1.4 16v |
| Water pump rigid inlet pipe | Bolt | M6 | 0.9 ÷ 1.1 | 1.4 16v |
| Coolant supply pipe to turbocharger | Connector | M16 | 3.0 ÷ 3.6 | 1.4 16v TJet |
| Coolant supply pipe to engine oil heat exchanger | Connector | M16 | 3.0 ÷ 3.6 | 1.4 16v TJet |
Parts & tools for this job For 2007 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.