Cylinder head(s)
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Engine › Cylinder head(s)
Tightening torquesCylinder head(s)
CYLINDER HEAD(S)
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Tappet cover | Bolt | M6 | 0.8 ÷ 1.0 | |
| Camshaft housing | Bolt | M8 | 1.3 ÷ 1.6 | 1.4 16v |
| Camshaft housing | Bolt | M8 | 2.3 ÷ 2.8 | 1.9 JTD 16v |
| Engine cylinder head extension plugs | Plugs | M16 | 1.3 ÷ 1.6 | 1.4 16v |
| Cylinder head | Bolt | M9 | 3 + 90° + 90° | 1.4 16v |
| Cylinder head | Bolt | M12 | 6.2 ÷ 6.8 + 90° + 90° + 90° | 1.9 JTD |
| Tapered plug in rear cylinder head extension | Tapered plug | M14 | 1.5 | 1.4 16v |
| Tapered plug in front cylinder head extension | Tapered plug | M20 | 4.0 | 1.4 16v |
Parts & tools for this job For 2007 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.