SUN ROOF - FUNCTIONAL DESCRIPTION

FUNCTIONAL DESCRIPTION

The services relay T13, located in the junction unit under the dashboard B2, supplies the sun roof control motor N35 - pin 6 - via the line protected by fuse F46 of B2 through the logic described above and controlled by the Body Computer M1 - pin 14 of connector F; the ignition-controlled supply (INT) for fuse F49 in the junction unit under the dashboard reaches pin 3 of N35.

The same ignition-controlled supply (INT) for fuse F49 is sent to the control button H60, pin 4.

The control signals from switch H60 are sent to pin 5 (opening) and to pin 10 (closing) of N35.

The speedometer signal reaches pin 8 of N35 from pin 17 of connector D of the Body Computer M1; pin 1 of N35 is earthed.

The Body Computer M1 receives a direct supply from the battery via the line protected by maxifuse B99 at pin 18 of connector F of the interface with the junction unit under the dashboard B2; the ignition-controlled supply (INT) reaches pin 9 of connector F of the interface with the junction unit B2.