Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)16 · Electrical equipment
16 · Electrical

Air bag module - passenger side - r.r

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Special accessories › Air bag module - passenger side - r.r
Electrical equipmentAir bag module - passenger side - r.r

AIR BAG MODULE - PASSENGER SIDE - R.R

Operation 5580C22 · AIR BAG SYSTEM

Before removing and refitting the Air Bag module the following preliminary operations must be carried out.

- Turn the ignition key to the OFF position and extract it.

- Disconnect the negative and positive battery terminals and insulate them.

- Wait for 10 minutes before continuing.

DescriptionConnector
BATTERYSee A001 BATTERY

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS

Op. 5580C AIR BAG SYSTEM

Precautions

Removing

Working from the passenger side, perform the following operations:

Op. 5570T85 CD/AUDIO PLAYER LOADER - R R

Op. 7040A45 RIGHT DASHBOARD SIDE TRIM - R.R.

Op. 7040A31 DASHBOARD COMPARTMENT ASSEMBLY - R.R.

1. Working from underneath the facia, unscrew bolts (1a) securing the air bag module (1b), partly withdrawing it from its seat to gain access to the electrical connection.

AIR BAG MODULE - PASSENGER SIDE - R.R

1. Undo the safety clips and disconnect the airbag module electrical connection.

DescriptionConnector
1AIRBAG ON DASHBOARD (PASSENGER SIDE)See Q011 AIR BAG IN DASHBOARD (PASSENGER SIDE)
AIR BAG MODULE - PASSENGER SIDE - R.R

1. Remove the Air Bag module from the vehicle and place it in the special cupboard resting it on a free surface with the bag facing upwards.

AIR BAG MODULE - PASSENGER SIDE - R.R

Refitting

Observe the following precautions:

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.

If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes together with the module and should be stuck on top of the existing one. Before sticking it it should be perforated at the month and 10 years after the year in which the module is being fitted (e.g. 2010 for 2000).

- Connect the electrical connection and do up the safety retainers.

DescriptionConnector
AIRBAG ON DASHBOARD (PASSENGER SIDE)See Q011 AIR BAG IN DASHBOARD (PASSENGER SIDE)

- Screw in the air bag module bolts and tighten to the specified torque.

ComponentFasteningdiaValue (daNm)Validity
BAG MODULE TO BRACKETBoltM60,64 ÷ 0,96

Op. 7040A31 DASHBOARD COMPARTMENT ASSEMBLY - R.R.

Op. 7040A45 RIGHT DASHBOARD SIDE TRIM - R.R.

Op. 5570T85 CD/AUDIO PLAYER LOADER - R R

- Connect the negative and positive battery terminals.

DescriptionConnector
BATTERYSee A001 BATTERY

- Check the operation of the system using the Examiner.

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.