CONNECT PANEL REPLACE

Operation 5580P12 · CONNECT PANEL

Removing

- Turn the ignition key to the OFF position.

- Disconnect the negative battery terminal.

1. Fit the extractors (1a) into the slots ont eh trim and remove Connect panel (1b), taking care with the electrical wiring on the rear.

1. Disconnect electrical connection (1a), radio aerial connection (1b) and GPS aerial (1c). Then release the GSM phone aerial wiring from retaining clip (1d) and disconnect electrical connection (1e).

1. Turn the Connect panel and disconnect the electrical connections (1a), (1b), (1c), (1d), (1e).

1. Remove the Connect panel from the vehicle.

Refitting

- Check that the Connect panel is not damaged.

- Connect the electrical connections and the connections for the aerials.

- Secure the GSM phone aerial in the retaining clip.

- Place the Connect panel in position taking great care and avoiding any interference with the cables at the back. If there is interference, check that the cables are correctly positioned.

- Connect the negative battery terminal.

- Check the operation of the Connect panel.