CRUISE CONTROL OPERATION ROAD TEST

Check 5580AE

Take the vehicle on the road under safe conditions and respecting the highway code

Turn on the CRUISE CONTROL system and set the ON/OFF switch on the CRUISE CONTROL stalk to ON

Check the Cruise Control warning light comes on.

Drive the vehicle at 50 or 70 km/h in 4th gear (according to the maximum speed limit on the road).

Turn the wheel on the CRUISE CONTROL stalk towards SET + and release it immediately to store the speed reached.

Remove your foot from the accelerator and check the vehicle maintains the set speed.

Turn the wheel on the CRUISE CONTROL stalk toward the SET+ position and maintain the position to increase the speed to 70 or 90 km/h (according to maximum speed limit on the road).

do not operate the accelerator.

Release the control wheel and maintain the set speed for a few seconds.

Press the BRAKE pedal and release immediately, then wait for the vehicle speed to drop to 50 or 70 km/h

do not operate the clutch.

Press and release the RECALL key on the end of the lever and check that the vehicle returns to the last speed value stored (70 or 90 km/h) according to the speed set previously.

do not operate the accelerator.

Press the CLUTCH pedal and release immediately, then wait for the vehicle speed to drop to 50 or 70 km/h

do not operate the brake

Press and release the RECALL key on the end of the CRUISE CONTROL stalk and check that the vehicle returns to the last stored speed value (70 or 90 km/h, according to the level set previously).

do not operate the accelerator.

Turn the wheel on the CRUISE CONTROL stalk towards SET- to reduce vehicle speed to 50 or 70 km/h.

do not operate the brake, clutch or accelerator pedals.

Release the control wheel and maintain the set speed for a few seconds.

Turn off the system by setting the ON/OFF switch on the CRUISE CONTROL stalk to OFF and check that the vehicle speed drops.

do not operate the brake, clutch or accelerator pedals.