Intermediate fuel delivery hose - r.r.
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Fuel tank and pipes › Intermediate fuel delivery hose - r.r.
INTERMEDIATE FUEL DELIVERY HOSE - R.R.
Removing
1. Connect the tool to the bleed valve on the fuel supply pipe and discharge the fuel pressure.
Follow the safety instructions and specific recommendations.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 2000002900 | Breather connector | Fuel system pressure drainage | 1.8 2.2 |
1. Working from beneath the vehicle, undo the bolts (1a) and remove the front pipe protection (1b).
1. Unscrew the bolts and remove the rear pipe protection.
2. Undo the bolts (2a) and remove the bracket (2b).
1. Unscrew bolts (1a), loosen bolt (1b) and turn the underbody reinforcement (1c) to the side.
1. Disconnect the rapid connector for the intermediate fuel supply pipe, front fuel supply pipe side.
1. Disconnect the rapid connector for the intermediate fuel supply pipe, rear fuel supply pipe side.
1. Remove the intermediate fuel delivery pipe after releasing from the underbody fastenings.
Refitting
- Refit the intermediate fuel delivery pipe and secure to the underbody with clips.
- Connect the rapid connector for the intermediate fuel supply pipe, rear fuel supply pipe side.
- Connect the rapid connector for the intermediate fuel supply pipe, front fuel supply pipe side.
1. Place the underbody reinformcement (1a) in its housing and secure it tightening the new bolts (1b) and (1c) to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Underbody reinforcements | Inner bolt (to replace) | M12 | (bodyshell side) 8.1 - 9.9 + 45° |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Underbody reinforcements | Outer bolt (to replace) | M10 | (bodyshell side) 5.0 - 6.1 + 45° |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Underbody reinforcements | Bolt (to be replaced) | M12 | (front suspension frame side) 9.0 - 11.0 + 90° |
- Fit the bracket in its housing and secure it using the bolts.
- Place the rear pipe protection in its housing and secure it using the bolts.
- Place the front pipe protection in its housing and secure it using the bolts.
Removing
- Position the vehicle on a lift.
1. Disconnect the rapid connector for the intermediate fuel supply pipe, rear fuel supply pipe side.
1. Undo the bolts (1a) and remove the front pipe protection (1b).
1. Unscrew the bolts and remove the rear pipe protection.
2. Undo the bolts (2a) and remove the bracket (2b).
Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R
1. Disconnect the rapid connector for the intermediate fuel supply pipe, front fuel supply pipe side.
2. Remove the intermediate fuel delivery pipe after having released it from the underbody fastenings.
Refitting
- Refit the intermediate fuel delivery pipe and secure to the underbody with clips.
- Connect the rapid connector for the intermediate fuel supply pipe, front fuel supply pipe side.
Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R
- Fit the bracket in its housing and secure it using the bolts.
- Place the rear pipe protection in its housing and secure it using the bolts.
- Place the front pipe protection in its housing and secure it using the bolts.
- Connect the rapid connector for the intermediate fuel supply pipe, rear fuel supply pipe side.
- Remove the vehicle from the lift.
Removing
- Position the vehicle on a lift.
1. Connect the tool to the bleed valve on the fuel supply pipe and discharge the fuel pressure.
Follow the safety instructions and specific recommendations.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 2000002900 | Breather connector | Fuel system pressure drainage | 1.8 2.2 |
1. Working from beneath the vehicle, undo the bolts (1a) and remove the front pipe protection (1b).
1. Unscrew the bolts and remove the rear pipe protection.
2. Undo the bolts (2a) and remove the bracket (2b).
1. Unscrew bolts (1a), loosen bolt (1b) and turn the underbody reinforcement (1c) to the side.
1. Disconnect the rapid connector for the intermediate fuel supply pipe, front fuel supply pipe side.
1. Disconnect the rapid connector for the intermediate fuel supply pipe, rear fuel supply pipe side.
1. Remove the intermediate fuel delivery pipe after releasing from the underbody fastenings.
Refitting
- Refit the intermediate fuel delivery pipe and secure to the underbody with clips.
- Connect the rapid connector for the intermediate fuel supply pipe, rear fuel supply pipe side.
- Connect the rapid connector for the intermediate fuel supply pipe, front fuel supply pipe side.
1. Place the underbody reinforcement (1a) in its housing and secure it tightening the new bolts (1b) and (1c) to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Underbody reinforcements | Inner bolt (to replace) | M12 | (bodyshell side) 8.1 - 9.9 + 45° |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Underbody reinforcements | Outer bolt (to replace) | M10 | (bodyshell side) 5.0 - 6.1 + 45° |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Underbody reinforcements | Bolt (to be replaced) | M12 | (front suspension frame side) 9.0 - 11.0 + 90° |
- Fit the bracket in its housing and secure it using the bolts.
- Place the rear pipe protection in its housing and secure it using the bolts.
- Place the front pipe protection in its housing and secure it using the bolts.
- Remove the vehicle from the lift.
Parts & tools for this job For 2005 Fiat Croma
- PARTFuel filterSearch: Fiat Croma 2005 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.