Cylinder head/s
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Engine unit › Cylinder head/s
Tightening torquesCylinder head/s
CYLINDER HEAD/S
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Cylinder head | Bolt (to be replaced) | M11 x 1.5 | (engine crankcase side) 3.0 + 90° +60° +15° | 2.2 |
| Cylinder head | Timing side bolts (to replace) | M8 X 1.25 | (engine crankcase side) 3.5 | 2.2 |
| Cylinder head | Bolt (to be replaced) | 2.5 + 90° + 90° + 90° + 45° | 1.8 | |
| Tappet cover | Bolt | M6 x 1 | (cylinder head side) 0.9 | 2.2 |
| Tappet cover | Bolt | 0.8 | 1.8 | |
| Cylinder head | Bolt | M12 | (engine crankcase side) 6.2 - 6.8 + 90° + 90° + 90° | 1.9 JTD 16v |
| Camshaft housing | Bolt | M8 | (cylinder head side) 2.3 - 2.8 | 1.9 JTD 16v |
| Cylinder head | Bolt | M12 | (engine crankcase side) 6.2 - 6.8 + 90° + 90° + 90° | 1.9 JTD 8v |
| Tappet cover | Bolt | M6 | (cylinder head side) 0.8 - 1.0 | 1.9 JTD 8v |
Parts & tools for this job For 2005 Fiat Croma
- PARTEngine gasket setSearch: Fiat Croma 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.