Engine cooling
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Engine unit › Engine cooling
Tightening torquesEngine cooling
ENGINE COOLING
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Drain plug on water pump | M20 x 1.5 | (water pump side) 2.0 | 2.2 | |
| Water pump | Bolt | M8 X 1.25 | (engine crankcase side) 2.3 | 2.2 |
| Water pump | Bolt | 0.8 | 1.8 | |
| Water pump cover | Bolt | M6 x 1 | (water pump side) 0.8 | 2.2 |
| Water pump drive pulley | Bolt | M6 x 1 | (water pump side) 0.8 | 2.2 |
| Water pump pulley | Bolt | 2.0 | 1.8 | |
| Water pump service cover | Bolt | M6 x 1 | (side) 0.7 | 2.2 |
| Thermostat unit | Bolt | M6 x 1 | (engine crankcase side) 0.6 - 1.0 | 2.2 |
| Thermostat unit cover | Bolt | M6 x 1 | (thermostat unit side) 0.8 | 2.2 |
| Engine cooling radiator supports | Bolt | (front suspension frame side) 1.5 | ||
| Thermostat | Bolt | M8 | (cylinder head side) 2.5 | 1.9 JTD 16v 2.4 JTD 20v |
| Water pump rigid inlet pipe | Bolt | M6 | (cylinder head side) 0.8 - 1.0 | 1.9 JTD 16v 1.9 JTD 8v |
| Thermostat | Bolt | M8 | (cylinder head side) 2.3 - 2.8 | 1.9 JTD 8v |
| Water pump | Bolt | M8 | (cylinder head side) 2.3 - 2.8 | 1.9 JTD 8v 1.9 JTD 16v |
| Rigid pipe on thermostat | Bolt | 0.8 | 1.8 |
Parts & tools for this job For 2005 Fiat Croma
- PARTEngine gasket setSearch: Fiat Croma 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.