Engine crank case
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Engine unit › Engine crank case
Tightening torquesEngine crank case
ENGINE CRANK CASE
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Lower engine crankcase | Bolt | M8 X 1.25 | (outer side) 2.3 | 2.2 |
| Lower engine crankcase | Bolt | M10 x 1.5 | (inner side) 2.0 +70° +15° | 2.2 |
| Bearing caps | Bolt | M12 | 1.9 ÷ 2.1 + 100° | 1.9 JTD 16V |
| Bearing caps | Bolt | M12 | 2.4 ÷ 2.6 + 100° | 1.9 JTD 8V |
| Bearing caps | Bolt (to be replaced) | 5.0 + 45° + 15° | 1.8 |
Parts & tools for this job For 2005 Fiat Croma
- PARTEngine gasket setSearch: Fiat Croma 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.